Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation
Your Fantech HEPA filtration system incorporates three stages of filtration. Air is drawn from the house via one of the installation examples, found
in this manual, by a powerful efficient EBM fan. The air is cleaned as it passes through the filters, where it is then reintroduced back into the home,
cleaned of the majority of harmful particles.
A semi-annual service schedule must be followed to ensure the HEPA unit is operating at its full potential.
Installation
CM 3000 - Uninsulated model
Option A & B
* Diagrams are examples only. Actual installation may vary.
The return side of the furnace is the recommended location for the HEPA to connect to. The supply side is normally avoided due to the higher static
pressure.
Furnace fan should operate continuous or when HEPA unit is on and running. (Options A & B)
Option A
Option C
* Diagrams are examples only. Actual installation may vary.
Duct work can be concealed in walls or closets. If the floor is the only choice, special care should be taken to avoid noise or drafts.
Option B
5
fantech
Publicité
Chapitres
Table des Matières
