Programming Table; Additional Modes; Troubleshooting Tips - Sunrise SRS 100 Mode D'emploi

pressing the (-) NEGATIVE or (+) POSITIVE button. Press Set to continue.
Setting the Day of the Month
Press the Set button repeatedly until the display shows DAY 1.The day can be adjusted by
pressing the (-) NEGATIVE or (+) POSITIVE button. February will either be 28 or 29 days
depending on whether it is a leap year, set previously in 'Setting the Year'. Press Set to continue.
Displaying Date Settings
Press the Set button repeatedly until the display shows SHOW DATE.The unit will normally
display the current Month and Date, it can also display the seconds or the full date e.g (Day,
Month, Date).The user can switch between the three options by pressing the (-) NEGATIVE or
(+) POSITIVE button and toggling between SHOW DATE, SHOW SECONDS or Day and DATE.
Press Set to continue.
The Programming Table below provides a useful summary of the Sunrise System dawn simulator
set up process.

Programming Table

No of Presses Result
of SET button (First setting is the Default)
1 CLOCK SET
2 SUNDAY ALARM TIME
3 MONDAY ALARM TIME
4 TUESDAY ALARM TIME
5 WEDNESDAY ALARM TIME
6 THURSDAY ALARM TIME
7 FRIDAY ALARM TIME
8 SATURDAY ALARM TIME
9 12/24 HOUR
10 SECURITY OFF or SECURITY ON
11 SPEAKER ON or SPEAKER OFF
12 SUNRISE 15 - 30 - 45- 60 - 90
13 SUNSET 15 - 30 - 45 - 60 - 90
14 BACKLITE OFF, BACKLIGHT ON or BACKLITEAUTO
15 NITELIGHTOFF or NITELIGHT ON
16 WEEKDAY (Starts on a Sunday)
17 YEAR (Starts at 2000)
18 MONTH (Starts at January)
19 DAY (Starts at 1st day of Month),
Leap Year calculation for Feb is automatically calculated based on
present year previously set
20 SHOW DATE or SHOW SECONDS or DAY AND DATE
21 SET LCD CONTRAST
22 SET LANGUAGE (after first use displays chosen language)
23 (Reverts To Normal Operation)
8

Additional Modes

Reading Lamp
The lamp can be used as a normal reading lamp with an additional feature that allows the intensity
of lamp to be set to any desired level between full off and full on. Switch the lamp on and off
using the snooze button when not in alarm mode.
Friday Night Mode
This mode is for when you wish to have a 'lie in' on the following morning. It enables you to dim
your lamp in the evening as normal, using the Sunrise System, and when in 'Friday Night Mode' the
Sunrise System will NOT wake you the following morning with either the Sunrise or the alarm
sounder.To activate this mode, press both the (+) POSITIVE and the NEGATIVE (-) buttons
together while Sunrise System is in Normal mode.The display will read FRIDAY NIGHT. Your lamp
will mimic a Sunset at the set fade down rate.This mode is automatically exited when the lamp is
fully off and returns to Normal mode.You can use Friday Night Mode any night of the week when
you wish to skip your next day wake up and have a 'lie in'.
Demonstration Mode
The unit has a Demonstration Mode which enables the unit to perform a SUNRISE, audible BEEP,
SUNSET every 50 seconds.This mode is mainly aimed at retailers who wish to demonstrate the
unit. To activate Demo Mode, press and hold the (+) POSITIVE button for 12 seconds.The display
will show DEMO MODE for a few seconds, then the unit will go through the sequence of
SUNRISE, audible BEEP, SUNSET indefinitely, even when the power has been switched on and off.
The audible BEEP can be switched off by switching the speaker off before entering Demo Mode.
The user can de-activate the Demo Mode by again pressing and holding the (+) POSITIVE button
for 12 seconds.

Troubleshooting Tips

How do I generate a Sunrise?
The Sunrise works in conjunction with the alarm time, first set the alarm time (see page 6), then
choose the desired Sunrise period from the menu (e.g set to 15 min). Activate the alarm by
pressing the alarm button (top right) (see page 5).The Sunrise will start 15 minutes before the
alarm time and the lamp will be at full brightness after 15 minutes.
How do I generate a Sunset?
Press the (+) POSITIVE button until the lamp is set to the desired brightness level.To activate the
Sunset just press the alarm button.The lamp will slowly dim and switch off. The default is 15
minutes. If you want to change the duration of Sunset or Sunrise see details on page 7.
How do I switch my lamp off after a sunrise?
Press the (-) NEGATIVE button until the lamp is off.
I cannot activate the alarm when pressing the alarm button and the alarm
symbol doesn't appear?
Ensure the security mode is switched Off. Is the Security Mode 'house' symbol displayed?
The alarm and Sunset cannot be activated when security mode is switched On.
Can the unit be reset to the factory default settings?
Yes it can. Unplug the unit from the Mains, then press and hold the set button (top left) while
unplugging the unit back into the mains supply.The sounder will beep 3 times after two to three
seconds.You can then release the set button and the unit has now been reset.
9