Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
The audible alarm can be disabled if you prefer to wake to the sunrise feature without sounder.
•
The Sunrise System connects directly to your own bedside lamp. Your bedside lamp then
generates the sunrise/sunset feature.The Sunrise System integrates with your own bedroom or
home décor.
•
Power fail backup is provided on all functions for short power cuts to the home electricity
supply or if the dawn simulator is inadvertently disconnected for a short time.
•
Full seven day alarm is provided to allow the user to set different times (if desired) on the alarm
for different days of the week.The factory programmed time for all seven days is 07:00am.
•
Text display can display Month and Date, Day and Date or just Seconds.
Leap years are automatically calculated.
•
Option to select a language.
•
LCD contrast adjustment
IMPORTANT Safety Instructions
•
NEVER immerse the clock or the wiring of the clock in water.
•
Do NOT connect anything but a regular home lamp to the Sunrise System (use light bulb up to
100w) NOT for use with any other appliance!
•
Do NOT attempt to replace the bulb in the lamp connected to the Sunrise System whilst the
power supply is connected or plugged in to either the lamp or the clock. Remember the
Sunrise System will retain all settings and maintain the operating clock for many hours even if
there is no power supply to the clock.
•
Use ONLY regular tungsten light/lamp bulbs in the lamp connected to the Sunrise System.
Do NOT use power saving bulbs or non standard bulbs in the lamp when connected to the
Sunrise System. Do NOT use with a dimming lamp.
Sunrise System Front and LCD Display Layout
alarm
speaker night light
sunrise/sunset
12 hour
mode
negative and positive button
snooze mode
security mode
snooze button
4
Sunrise System Clock Top and Set Up Buttons
SET BUTTON
Connecting the Sunrise System to your lamp
The Sunrise System is supplied with a specially designed cable. One end of the cable has a socket,
insert the plug of your bedside lamp into this socket.The other end of the cable is the mains plug
for use with the wall socket.
Set Button
This button is used to activate SETUP mode and scroll through the various menus. Additionally,
pressing the SET button when the alarm is activated will switch the display from showing the
present time to the alarm time. Once the SET button is released the display will revert to
displaying the present time.
Negative/Positive Buttons (- and +)
In NORMAL mode these buttons are used to dim or brighten the bedside lamp.The NEGATIVE
button dims the lamp and the POSITIVE button brightens the lamp.
Alarm Button
This button activates or de-activates the Alarm and Sunset. When the Alarm button is pressed the
display will read ALARM ON and the alarm time will show for approxi-mately 5 seconds before
reverting back to the present time.The alarm clock symbol will be illuminated. If the button is
pressed again the display will read ALARM OFF and the alarm clock symbol will disappear.
Snooze Button
When the Sunrise System is in NORMAL mode (Alarm not activated) this button will switch the
lamp either ON or OFF. This can be used at night to quickly Δ 6
illuminate the room. If the Sunrise System is in alarm mode, the Alarm is Sounding, and the light is
on, this button activates the snooze mode. When the Alarm sounds (buzzer) and the lamp is at full
brightness, the user has a few options:
1.
Press the snooze button momentarily and the buzzer will stop.The lamp will stay on, after
9 minutes the buzzer will sound again.
2.
Press and hold the snooze button for 4 seconds, now the buzzer will stop and the light will dim
down over 4 seconds.The lamp will then 'fade up' again to full brightness over 9 minutes and
the buzzer will sound.
To exit the snooze mode, simply press the alarm button and the display will show Alarm Off for a
ALARM ON/OFF
5
Publicité
Table des Matières
