DYASET 648040 Mode D'emploi page 5

4. CONNECTING UP TO THE ELECTRICITY SUPPLY
The heat pad must be used on a A.C. supply only. Never connect to a D.C. supply. The wires are coloured in accordance with th e
international colour code. The 13 amp plug should be fitted with a 3 amp fuse.If connected to any other system a maximum 5 amp fuse
protection should be used.
5. CLEANING
Always unplug before cleaning. The pad may be wiped using mild disinfectant using a damp cloth. Never immerse in water.
6. SERVICING AND REPAIR
In the event of damage or failure no attempt should be made to tamper with or make any type of repair, instead please return to DYASET
SRL or contact the DYASET SRL customer service for further information, stating the nature of complaint.
7. GUARANTEE
If this heat pad should fail within ONE YEAR after the date of purchase we undertake to repair or as an option replace the pad free of
charge.
This applies only if the pad has been used as instructions and has not been damaged through misuse or tampered with. Should t he
pad need attention during this period please return to DYASET SRL enclosing proof of purchase. The pad will either be sent for repair or
more likely be replaced. This undertaking is in addition to consumer statutory rights and does not affect those rig hts in any way.
Should you need any help or advice on initial use and installation or have any queries regarding the use of the pad please co ntact our
service department on +39(0)532814820 or email dyaset@dyaset.com
NOTES
DYASET S.r.l. Via A. Grandi, 3 - 44015 Portomaggiore (Fe) Tel. 0532/814820 – fax 0532/683910 e-mail: dyaset@dyaset.com
5