Door Removal Instructions - Heartland HCTMR20A Instructions D'utilisation

Tools Necessary:
NOTE
Before you begin, turn the refrigerator temperature control
to "OFF" and remove the electrical power cord from the wall
outlet. Remove any food from door shelves.

Door removal instructions:

1. Remove toe grille.
2. Remove top hinge cover. Trace around the hinge with a
soft lead pencil. This makes reinstallation easier. Remove
top hinge and lift door off center hinge pin. Set door aside.
3. Unscrew center hinge
pin using adjustable
wrench and save for re-
assembly. Ensure plastic
washer stays on hinge pin.
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside
screw and loosening two outside screws enough to allow
hinge and shim to slide out.
DOOR AND HINGE REMOVAL INSTRUCTIONS
Socket
wrench set
Phillips™ Head
3/8" fixed
wrench
Top
hinge
cover
Top
hinge
Top hinge
Top hinge
cover front
cover rear
screw
screw
Top
Bottom
hinge
hinge
screw
screw
6. Remove the 3 screws from the anti-tip bracket with the
3/8" socket wrench and remove the anti-tip bracket from
the cabinet.
7. Remove the 3 screws from the toe grille support with the
3/8" socket wrench and remove the toe grille support from
the cabinet.
Reassembly is the reverse of the above procedure.
Toe grille
support
Toe grille
cover
8
Adjustable
wrench
Door
stop
Door
screw
stop
Washer
Shim
Hinge
pin
Center
hinge
Screws
Anti-tip bracket