Regalo 1350 Instructions De Montage page 10

STEP 5
Reassemble the upper locking joint by adding one of the previously removed
toothed disks and locking knobs.
STEP 6
Tighten each of the locking
knobs by turning them
clockwise, fixing the play yard
into the configuration you have
chosen. To position the play
yard into a new configuration
or shape, simply loosen each
of the locking knobs, adjust
and retighten.
NOTE: When adding or removing additional panel units to the
configuration, panels must be added or subtracted in sets of two for the
freestanding enclosure to function properly.
10 English