Safety Functions - Cartrend DP4.0 Mode D'emploi

SaFety FuNCtIONS

• the charge is protected from user error and prevents damage to
the connected battery.
• No risk of overcharging!
• the charger will not damage the electronics in your vehicle.
Protection Description
to avoid damage to charger and
battery, the charger will turn off its own electronic
system and will immediately reset the system to
basic settings in the case of
• short circuit
abnormal
• wrong connection
Operation
• open circuit
• reversed polarity connection
• Battery voltage below 3.0 v ±0.5 v
the charger will remain in standby mode and the
display shows the error indicator.
During the charging process, if the charger beco-
mes too hot or due to high ambient temperature, the
power output is automatically reduced.
Overheat
the charger continues to trickle charge and automa-
tically starts increasing power when the temperature
drops.
Fully controlled by internal Micro-Computer-unit
MCu
(MCu), which assures a faster, powerful, reliable and
Control
smarter charging process.
36
Microprocessor Battery Charger DP4.0 / DP6.0 / DP10.0