Assembly Instructions - Uberhaus GPT1810G Guide De L'utilisateur

Remove all contents from the packaging. Make sure all parts are present before attempting assembly. Once the grill
is fully assembled, go back and check to make certain all the bolts are secure. Tighten again using the screwdriver
provided if necessary.
Estimated Assembly Time: 20 minutes.
Step 1
a) Align the holes on the right back side of body assembly
with the holes on the lower hinge
b) Insert one bolt (BB) into the pre-drilled hole, attach
with one flat washer (DD
one nut (EE)
c) Repeat the procedure for the left back side of body
assembly.
d) Go back and tighten all bolts using the screwdriver
provided.
M5 × 10 Bolt
BB
Flat washer
DD
M5 Spring washer
CC
M5 Nut
EE

Assembly Instructions

.
) one spring washer (CC) and
4 PCS
4 PCS
4 PCS
4 PCS
Step 2
a) Insert the venturi side of the burner
the hole on the right side of body.
b) Align the pre-drilled hole under the burner with
the hole on the bottom of body.
c) Insert one flat washer (HH
(GG) and one bolt (FF) into the pre-drilled hole.
d) Tighten the bolt using the screwdriver provided.
e) Screw the regulator valve
venturi tube of the burner.
HH
GG
FF
8
, one spring washer
)
into the threaded
Flat washer 1 PC
Spring washer 1 PC
M6 × 7 Bolt 1 PC
through