Ups Communicator Self-Diagnostic Software - LEGRAND Daker DK 1 Manuel D'installation

X
10) Turn off the UPS and the utility input breaker.
11) Your setting changes are now complete.
Connection
The UPS has standard RS232 and USB interfaces that provide access, through a processor, to a
range of data for the operation and the history of the UPS.
This function can be accessed through a WINDOWS (*) interfacing program, connecting a serial
port of the PC to the interface sockets [indicate the reference number] that can be found on the
back of the UPS using an RS232 or USB cable.
From the website www.ups.legrand.com it is possible to download free of charge a self-diagnostic
software running on WINDOWS (16 e 32 bit) e Linux platforms.
This software can be used for the following functions:
- Display of all the operation and diagnostic data in case of problems.
- Setup of special functions.
- Automatic shutdown of the local computer (Windows and Linux operating systems).
* Windows is a registered trademark of Microsoft Corporation.

5 UPs communicator self-diagnostic software

Daker DK 1, 2, 3 kVA
37