Instruction For Use - SALAMANDRES SE - 40 S Notice D'installation Et D'emploi

• safety fuse of the feeder and inner mains can stand the loading of the device (see label of the matrix)
• mains are equipped with effective grounding according to standards (ČSN) and conditions given by law
• socket or switch of the feed is well accessible from device
We refuse any responsibility in case of not respecting above mentioned rules. Before the fi rst use it is necessary
to remove all the protection foil and to clean the device - see chapter „cleaning and maintenance".
Before the fi rst use it is necessary to remove all the protection foil and to clean the device - see chapter „cleaning
and maintenance". We recommend you to leave the device work empty for 15-20 min when switching it on for
the fi rst time because in produces bad smell and smoke.
Maintenance
We recommend to have the device checked once a year by the proffesional service. Only qualifi ed or competent
persons can do interventions in the product.

INSTRUCTION FOR USE

Before the fi rst use of the device you must remove protection foil and wash the device with water containing
detergent and splash with clean water. Never leave the device on without supervision. Device can be used only
for heating, grilling, gratining and backing toasts. Switch the electric feeder on by main switch, turn the knob (C)
and adjust the performance you need. Pilot lamp (B) lights yellow untill the device is switched off, green when
the heating elements are on. Switch the device off by turning the knob (C) into position „0" and switch off the
electric feeder by main switch.
C
B
5