Basic Operation Of The Projector - LG HX300G Manuel Du Propriétaire

Basic Operation of the Projector

1 . Place the projector on a sturdy and horizontal surface with the PC or AV source.
2 . Place the projector with the desired distance from the screen. The distance between the projector and the
screen determines the actual size of the image.
3 . Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a
right angle, the screen image will be crooked. Although, slight angles can be counteracted using the
Keystone adjustement.
4 . Connect the power cable to the projector and the wall outlet after placing the projector in its desired loca-
tion.
projection distance based on the picture format
X/2
Screen height (X)
X/2
Y/2
Screen Width (Y)
Y/2
Diagonal Size (mm)
Screen
Projection offset ratio: 110%
Projection distance (D)
Screen
38.6mm
Projection distance (D)
4 : 3 Scale
Horizontal Size (mm)
Projection Distance (D)
Vertical Size (mm)
Installing and Composition
(mm)
11