Troubleshooting; Key To Reports; Reset Default Settings - Electrolux ControlBox 24/7 Manuel D'utilisation

Key to reports

Error
External power supply error or
disconnected
External power supply restored
Battery switched off or disconnected
Battery reconnected
Low battery level
Low battery level restored
High temperature level
Low temperature level
Low temperature level restored
Some reports differ, depending on which version of ControlBox24/7 you have.

Reset default settings

If you want to delete all settings on your ControlBox24/7, the process is simple, using 'default reset'.
Follow the steps below.
1.
Disconnect external power supply and switch off the battery switch under the SIM card cover.
2.
Hold down both buttons on the right side of the unit (GSM Test & IR Test buttons) at the same time as you
reconnect the external power supply.
3.
When all the lights on the front of the unit flash rapidly, release the buttons on the side.
4.
Your ControlBox24/7 is now restored to default settings.
Text report received
AC Power - FAIL
(15 minutes ago)
AC Power - RESTORED
(15 minutes ago)
Battery - DISCONNECTED
Battery - CONNECTED
Battery - LOW
Battery - Restored
Temperature - HIGH (over xC)
Temperature - LOW (below xC)
Temperature - RESTORED (above xC) 3 minutes
19

TROUBLESHOOTING

Delay before report sent
15 minutes
15 minutes
3 minutes
3 minutes
3 minutes
12 hours
3 minutes
3 minutes