Service & Tools Required - Nilfisk Hybrid Serie Mode D'emploi

3. Service & Tools required
Service may only be carried out by authorized and qualified personnel.
CAUTION
The system must only be serviced when there is no voltage or pressure on the system.
1. Open a water outlet to depressurise the system.
2. Turn off the main switch at the control box.
Tools required
Note: the new display comes with factory settings. If you want to maintain individual pump-settings, please
retrieve them from the display, and note them elsewhere, before disassembly.
10
Hex 4,12
T4, TR
0,5x3mm
1x5,5 mm
PZ2
10, 11, 12, 13,
14, 15, 17, 19 mm
Ø5 metal drill bit.
9, 22, 29 mm