Rc Functions - XciteRC X-Tide micro Mode D'emploi

EN
Connect the battery. The connecting sys-
tem is polarized, do not use force.
• IMPORTANT NOTE: The safety circuit of the X-Tide micro prevents starting the motor, as long as
the boat is not in the water. Therefore, do not be surprised that the boat does not respond to the remote
control „in the dry"! Once it is in the water, the remote control system is activated and the boat can be
controlled as desired.
• Check the motor and servo functions.
• If the drive battery runs low, the motor speed is reduced and the X-Tide micro starts slowing down. Navi-
gate to the shore of the water immediately. Charge the drive battery again.

RC functions

Forward - reverse
Move the throttle lever towards you, the X-Tide micro will move forward. Move the throttle stick back to
reverse.
20
Place the upper hull with the nose on the
front of the hull (1), then push back (2) and
secure with the lock (3).
RC functions
X-TIDE micro