System Assembly; Humidity Settings - DeVilbiss Healthcare DV6HH PPC Serie Instructions D'utilisation Et D'entretien

SYSTEM ASSEMBLY

1. Check to be sure Air Supply Port Cover is
inserted into back of CPAP device.
2. Place front of CPAP device on humidifier cradle,
ensure locking tabs are engaged, and click into
place.
3. Fill clean chamber to fill line with distilled water
and insert into cradle. NOTE – Use distilled water
to avoid mineral buildup inside the chamber.
Chamber Fill Chamber in Cradle
EN - 4
4. Insert power cord
into back of device and
wall outlet.
5. Attach tubing to device.
6. Prepare mask and
connect to tubing.

Humidity Settings

1. Select Humidity
2. Choose humidity
setting of OFF or 1
through 5 bars. NOTE: 5
bars is the highest
humidity.
A-DV6HH