KREAFUNK bGEM Manuel D'utilisation page 11

Method 1
1. Power on both earbuds one by
one. They will pair with each
other automatically. After a
successful pairing, the earbuds
will prompt "Master" and
"Slave" individually. The blue
LED light will flash once every
2 seconds on the "Master"
earbud, and twice every 5
seconds on the "Slave" earbud.
2. Press the power button on
the "Master" earbud for
about 2 seconds to set it into
connecting mode.
3. Now switch on the Bluetooth
on your device and connect
to either bGEM L or bGEM R
depending on which is the
"Master".
Method 2
1. Power on one earbud and
connect it to your device via
Bluetooth. Then power on
the other earbud and the two
earbuds will pair automatically.
2. The earbud that was connected
to your device in the first step
will be the "Master" earbud.
The blue LED light will flash
once every 2 seconds on the
"Master" earbud, and twice
every 5 seconds on the "Slave"
earbud.
Remarks:
After a successful pairing, the two
earbuds ("Master" / "Slave") will
remember each other.
English
11