T-Fal CURVED GRILL Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2 - Connection and pre-heating
5
3 - Cooking
7
5 Plug the power cord into an outlet.
If an extension cord is used: take all necessary precautions
to prevent anyone tripping over an extension cord.
If the power supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
The power supply cord should be regularly examined for
signs of damage, and if the cord is damaged, the appliance
must not be used.
On first use, there may be a slight odor and a little smoke
during the first few minutes. In these cases, open the
windows and wait until there is no more smoke or odor.
This appliance is not intended to be operated by means
of an external timer or separate remote-control system.
6 To pre-heat the appliance, turn the dial to the desired tem-
perature setting. After pre-heating, the appliance is ready
for use.
The preheat indicator light comes on to indicate the grill is
heating.
When the selected temperature is reached, the preheat
indicator light will go out.
6
The preheat indicator light will turn on and off during
cooking to indicate your desired temperature is being
maintained.
7 Do not move the appliance when in use.
Carefully place foods to be cooked on lower grilling plate.
EN
7

Publicité

Table des Matières
loading

Table des Matières