Grounding Instructions; Model And Serial Number Location; Care, Cleaning And Maintenance - Viking DrawerMicro VMOD241SS Instructions D'installation

GROUNDING INSTRUCTIONS

This appliance must be grounded. The DrawerMicro
Oven is equipped with a cord having a grounding wire
with a grounding plug. It must be plugged into a wall
receptacle that is properly installed and grounded in
accordance with the National Electrical Code and local
codes and ordinances. In the event of an electrical
short circuit, grounding reduces risk of electric shock by
providing an escape wire for the electric current.
W A R N I N G :
PERMANENT AND CORRECT INSTALLATION
Improper use of
the grounding
3-Prong Plug
plug can result in
a risk of electric
shock. Do not
use an extension
Grounding Pin
cord.
CARE, CLEANING AND
MAINTENANCE
Refer to the Use and Care Manual for cleaning
instructions.
VIKING RANGE CORPORATION
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
3-Prong
Receptacle
Ground
Receptacle Box
E4
MODEL AND SERIAL NUMBER
LOCATION
The name plate, including model and serial number, is
located on the faceplate behind the drawer front.
BEFORE YOU CALL FOR SERVICE
Read the BEFORE YOU CALL and operating instruction
sections in your Use and Care Manual. It may save you time
and expense. The list includes common occurrences that
are not the result of defective workmanship or materials
in this range.
Refer to the warranty in your Use and Care Manual for
Viking's toll-free service number and address. Please
call or write if you have inquiries about your microwave
product and/or need to order parts.
F20720 EN
TINSKB113MRR0