Honeywell TrueFRESH ERV/HRV Série Guide D'installation page 20

Installation Steps (continued)
3a
Hanging the VNT5150, VNT5200,
The ERV/HRV unit enables you to save time and effort by offering a simplified hanging system.
TIP: Removing the core unit makes installation easier since the unit weighs less
without the core inside.
1. Attach straps to joist using the supplied
washers and four 1 in. hex-head hanging
screws.
NOTE: If the unit is not level, improper drainage will occur and could lead to moisture and leakage problems.
18
3. Make fi nal adjustments to ensure that the HRV/ERV is level.
VNT6150 or VNT6200
2. Pull on middle of strap while gently lifting unit
upward to raise the unit.
TrueFRESH™ ERV/HRV Ventilation Systems 69-2480EF—13