Oceanic MF-40TC Guide D'utilisation page 28

ASSEMBLY
a. Base assembly
Attach the base of the humidifier to the fan base using the
supplied screw (Fig.2).
Insert the pins and wheels (see figure below).
Assemble the fan body to the tubes using the 2 screws
provided (Fig.3)
Assemble the tubes (1) on the base (4) by tightening
the four screws (3) and plate (5) with the nuts (6).
Slide the cover (2) down the base (4). (Fig.1)
Wheels
Axis
Base
Screw
28