Philips SBC LI 805/00 Mode D'emploi page 6

XP SBC LI 805 24-06-2002 09:06 Pagina 6
ENGLISH
6
1 Make sure the RF functionality of the RU 885 is enabled.
2 Select the equipment you wish to operate.
3 Point the remote control in the direction of the receiver and press the
• For detailed operating instructions see the RU 885 User Guide.
• Once installed, the receiver can be used as additional receiver in the
• For detailed operating instructions see the LI 800 User Guide.
Operation
Operation with RU 885 RF remote control
required function button.
> The receiver will confirm reception by the flashing of the red light in the
window on the front and your equipment will respond.
Operation in the SBC LI 800 Remote Control
extender set
SBC LI 800 Remote Control extender set.
Notes:
– The distance between remote control and receiver should not be greater than
15 meters.
– The set may not work properly or may not work at all with devices of the
following brands:
– Bang & Olufsen;
– Nokia (some satellite receivers);
– Sagem (some satellite receivers);
– Pace (some satellite receivers).