Safety Instructions; Assistance With Problems - Intenso 875417 Notice D'utilisation

SAFETY INSTRUCTIONS

Dangers for children and persons with restricted physical, sensory or
mental abilities:
Children often underestimate dangers or do not recognise them at all. This device is not intended
to be used by persons (including children) with restricted sensory, physical or mental abilities
or lack of experience and/or knowledge, unless they are supervised by a person responsible for
their safety or received instructions from the person on how to use the device and they have
understood the resultant dangers. Unsupervised children should not have access to the device.
Make sure that children do not play with the device.
General
The device may not be exposed to spray or dripping water.
Vessels filled with liquid (vases, glasses or similar) may not be placed on the device. There is
danger that the vessel tips over and the liquid impairs the electrical safety.
Do not operate this device with wet hands.
Do not insert any items, which are not intended for its use, into the openings of the device. This
could lead to an electrical short-circuit and a resultant fire.
Do not block or cover the openings of the product.
Under no circumstances use the device in the case of visible damages on it or the USB cable.
When positioning the device, pay attention that no one can tread on the cable or trip over it. Do
not place any objects onto the cable.
Do not drop the device or subject it to vibrations or impacts, this applies in particular to the
transport. Do not move the device when it is in operation. Hard drives are extremely vulnerable
and the data located on them can be destroyed irretrievably through this. Such damages are not
contained in the guarantees.
Carry out data backups frequently to avoid a possible data loss.
Data recovery is not part of the guarantees and cannot be conducted by our Service Centre!
Keep the device away from any type of moisture and avoid dust, heat and direct sunlight.
Do not open the housing of the device and do not disassemble it into its component parts. Do
not try to repair it yourself. The guarantee expires in this case.
Avoid using the device in strongly magnetized areas such as, for example, in the direct proximity
of TV sets, loudspeakers, etc. to avoid data loss or other malfunctions.
During operation pay attention to a vibration-free base to avoid damages.

ASSISTANCE WITH PROBLEMS

Status LED is not illuminated
Check the external hard drive and the USB cable for visible damages. Should there be damage
please contact our Support to exchange it. Under no circumstances use the defective device or
cable. Check that the cable connection is plugged correctly.
Hard Drive is not recognized
Check the points under "Status LED is not illuminated" first.
EN - Page 4 of 6