System Setting - LENCO TFT-721 Mode D'emploi

You can also change the items of region and update mode
before you decide start search.
Scan By NIT: Select NIT if you want to search on all of
the transmitters connected to a specific
network, focuses to Start Search and
Press OK to start searching for channels.
During the channel search procedure, the TFT-721 may
download a large number of channels. This may include
channels from various Service Providers, also those to
which you do not have access unless you have a smart
card from one of those Service Providers. If you select a
program to which you do not have access, you will get a
message on the screen.
After search, press OK to save the new channel or press
Menu if you don't want to save it.
Sort Channel
You can select how the channels shall be sorted in the TV
and Radio lists. There are two sort mode (Name Up or
Name Down) are used here.
Note: Sorting does not apply for Favorite Lists.
Figure 4.2.6

4.2.4 System Setting

The system setting folder includes following menu list:
Time Setting, Language Setting, Parental Setting, A/V
Setting, Factory Setting and Booking List.
To move the menu list into focus, use the up/down cursor
buttons
You can enter the submenu list by pressing OK.
Exit the menu list by pressing Menu.
Figure 4.2.7
Time Setting
It includes following submenu list: TimeZone Setting
and Banner Time Setting.
Figure 4.2.8
TimeZone Setting: you can set the time zone here in
order to correct current time zone
where you are.
Banner Time Setting: When you switch channels, an
information banner will be
Language Setting
In order to fit the person of different countries, the menu
language can be set to different languages (English,
Dutch, French, German, Italian, Portuguese, Spanish).
The default language is English.
Here, you can set audio language too. If more than one
audio language is transmitted, you may select one
language. When available, you can select from the
different languages (same as menu languages) being
broadcast.
Parental Setting
To open this menu you will be asked to enter your access
code. From the factory the access code is set to 888888.
After set, the access code has to be entered before you can
watch locked channels. You need to enter the access code
every time you start the TFT-721 from standby.
When input the right access code, the Parental Setting
Menu will be opened.
Change Pin Code: You can change the access code for
Search Encrypt: This function can set: you need to input
A/V Setting
It includes following submenu list: Video Setting and
Audio Setting.
Video Setting:
7
shown for a few seconds. You
can select the duration for
which the banner will be shown.
(1, 3, 5, 7, 9seconds)
Figure 4.2.9
Figure 4.2.10
Figure 4.2.11
entering parental setting and locked
channel.
pin code when re-search channels. It
prevents someone else change you
setting.
Figure 4.2.12