Hama MiMo 300 Express Mode D'emploi page 27

WPA pre-shared-key (recommended for most users)
First select whether you want to use
WPA with TKIP encryption algorithm,
WPA2 with AES encryption algorithm
or the WPA Mixed mode. The mixed
mode allows clients using WPA or
WPA2 to access the access point.
The mixture is very practical as p
resently few XP clients are WPA2
compatible. If the mixed mode is
switched off, the AP only allows WPA2
clients, and the large number of WPA
(TKIP) devices cannot connect.
Then you must select the key format
(Pre-shared Key Format). Select either
Pass phrase for a key with a length of
at least 8 and max. 63 characters,
whereby letters (A-Z), numbers and punctuation marks can be used, or Hex for a 64 character key, in which
only numbers from 0-9 and letters from a-f can be used.
The next step is entering a key, called a pre-shared-key (PSK). All clients which are to access the access
point must know this character string.
Click Apply to save your settings. You must then restart the router for the settings to take effect. To do so, click
Apply in the next window. The wireless network with encryption is available after you restart.
WPA RADIUS (requires a special authentication server)
First select whether you want to use WPA with TKIP encryption algorithm, WPA2 with AES encryption
algorithm or the WPA Mixed mode. The mixed mode allows clients using WPA or WPA2 to access the access
point. The mixture is very practical as presently few XP clients are WPA2 compatible.
Select WPA2 (AES) only. The AP only allows WPA2 clients, and the large number of WPA (TKIP) devices
cannot connect.
Next enter the RADIUS server IP address. The RADIUS Server Port is preset to 1812. Enter the password for
the RADIUS Server.
Click Apply to save your settings. You must then restart the router for the settings to take effect. To do so, click
Apply in the next window. The wireless network with encryption is available after you restart.
3.2.3 Setting the Encryption for Bridge-Point to Point, Bridge Point to Multi-Point and Bridge WDS
First, it is important to understand a range of terms. The next section will explain the main terms
used here:
Authentication: Authentication is a process in which the identity, e.g. of a person is determined
based on a certain characteristic. This can be done by fingerprint, password or any other proof of
authorisation.
11