Hold Function - ClearSound CSC600D Manuel D'utilisation

█ Hold Function

The display will show a Hold option once you have a call
established. To put a call on hold:
1. Press the Hold soft key once. The "LCD will display
"Call on hold". Hanging up the handset will not
disconnect the call.
2. To continue the conversation, simply pick up the
handset or press the Unhold soft key.
█ Call Waiting (Flash)
Your ClearSounds® CSC600D comes from the factory preset
for Flash Time to 600ms. Flash timing is the signaling
process that tells the phone system when a phone is on
hook or off hook. The United States uses a 600ms timing
sequence. The European Union uses a 300ms timing
sequence. You can choose from 100ms, 110ms, 300ms or
600ms. To change this setting:
1. Press the Menu soft key to display the main menu list.
2. Press ▼ to scroll to Set Phone and then press the
Select soft key.
3. Press ▲ or ▼ to scroll to Set Flash and then press the
Select soft key.
4. The display shows the current setting. Press ▲ or ▼to
to choose from 100ms, 110ms, 300ms, or 600ms and
then press the Select soft key to confirm.
Your ClearSounds® CSC600D comes from the factory preset
for Caller ID on Call Waiting ON. To change this setting:
1. Press the Menu soft key to display the main menu list.
2. Press ▼ to scroll to Set Phone and then press the
Select soft key.
3. Press ▼ to scroll to Call Waiting and then press the
Select soft key.
4. Press ▲ or ▼ to choose between ON/OFF to activate/
deactivate the call waiting function and then press the
Select soft key to confirm.
27 – ENGLISH