Ringer Setting - ClearSound CSC600D Manuel D'utilisation

Please Note: The AMP key controls both the loudness & tone
frequency of the handset.
Using the Amplification Reset Override Switch (located
on the underside of the base) The ClearSounds® CSC600D
is designed with unique features to protect users from being
exposed to dangerous sound levels. You are able to switch
between automatic or manual amplification, and you should
select the setting that best suits your needs.
Set ON – When the Amplification Reset Override Switch
is set to ON, the amplify function will be ON every time a call
starts. The user will no longer need to remember to press the
AMP key with every telephone conversation. When the phone
hangs up, the amplify setting will remain ON.
Set OFF – When the Amplification Reset Override Switch
is set to OFF, the amplify function will be OFF every time a
call starts. This allows people who do not require the level of
amplification offered on the phone to use it. Every time a call
starts, the user will need to press the AMP key in order to
gain the extra level of amplification and tone control. When
the phone hangs up, the AMP key will reset to OFF.
Important: You may manually turn ON and OFF the amplify
function during a conversation by simply pressing the AMP key.
NOTE: Your ClearSounds® CSC600D comes from the factory
preset in the OFF position. If you would like to override the
factory preset, simply change the selection on the underside
of the phone to ON.
█

Ringer Setting

You can adjust the ringer of your phone as high as +95 dB.
There are 2 methods to set this feature.
:
Method 1 (Volume Only)
By adjusting volume on the right side of the phone
In standby mode, you can adjust the ringer volume by using
the Volume Control VOLUME- or VOLUME+ on the right side
of the phone. The display will show the current level. For
16 – ENGLISH