Releasing And Inserting The Battery Pack; Charging The Battery Pack - Bosch PB360S Consignes De Fonctionnement/Sécurité

Releasing and Inserting
Battery Pack
To release or insert the battery pack from radio unit, open
the charger door by unlocking the latch. To insert battery,
align battery with terminals and slide battery pack onto
terminal until it locks into position. Do not force.
To release battery, depress battery release button and slide
battery of the terminals.
DOOR RELEASE
Charging Battery Pack
CHARGER OPERATION:
Insert battery and close door.
Charge only Bosch batteries
WARNING
BAT618, BAT610G, BAT619G
. Other batteries may burst causing injury
BAT611 & BAT612
and damage. Read additional safety information on
LATCH
BAT609,
,
BAT620,
underside of radio.
Open charger door by releasing latch. Plug the unit's power
cord into your standard power outlet, then insert battery pack
into charger.
1. The LCD will display the "CHARGING
front of the unit. This indicates the battery pack is
charging.
2.When the word "CHARGING" next to the battery
ICON disappears, charging is complete.
3. The purpose of the charging icon on the LCD is to indicate
that the battery pack is charging. The charging icons will
disappear in less time if the battery pack was not
completely discharged.
4. When the battery pack is fully charged, the battery pack
can be inserted into a tool, or used to power the radio
instead of the power cord.
Note: It is recommended that the battery charger bay door
be kept shut at all times.
TERMINALS
10
" ICON on the
REPLACE AA BATTERY
WHEN UNIT NO LONGER
KEEPS CORRECT TIME