Menu Options; Control Panel Description - Chauvet DJ Mega Trix Manuel De Référence

Mega Trix™ QRG
AC Power
Power Linking
Fuse Replacement

Menu Options

Main Level
DMX Address
Auto Program
Program Speed
Sound Active
Programming
Control Panel
Description
This product has an auto-ranging power supply that works with an input voltage
range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
You can link up to 17 Mega Trix™ units at 120 VAC and 32 units at 230 VAC. You
should never exceed this number.
To replace the fuse in the Mega Trix™, use the following steps:
1. Disconnect this product from the power outlet.
2. Wedge the tip of a flat head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing pulling out the installed fuse.
4. Remove the blown fuse from the safety cap and replace with a fuse of the exact
same type and rating.
5. Insert the fuse holder back in place and reconnect power.
Programming Levels
d 1 001–512
AUTO
S-- S 1–S100
SND
For details on how to program this product, please refer to the product's User Manual.
Button Function
Exits from the current menu or function.
<MENU>
Enables the currently displayed menu or sets the currently selected
<ENTER>
value into the selected function.
Navigates upwards through the menu list and increases the numeric
<UP>
value when in a function.
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function.
Sets the DMX starting address
Turns on auto program
Sets auto program speed
Turns on sound active mode
4
Description
EN