BEARWARE 303715 Manuel page 23

Enabling the alarm
1. Open the basic settings by pressing and holding the "MODE/SET" button in
the default screen for about 5 seconds.
2. Press the "MODE" button seven times in the default settings to access the
alarm mode. The alarm time is now shown in the display.
3. Now press and hold the "MODE/SET" button for 3 seconds to turn the
alarm time on or off. Once the alarm time is on, a bell symbol ( ) is shown
in the display under the alarm time. If the alarm time is off, the bell symbol
disappears.
Switching off the alarm
The alarm is activated at the configured time. The alarm sounds for about 2
minutes before it turns off automatically.
Press the "SNOOZE/LIGHT" button to cancel the alarm. If a snooze symbol is
shown on the display, this means that the snooze function is activated and the
alarm will go off again in 5 minutes.
Press any button to switch off the alarm.
Weather forecast
Image
English
Meaning
Sunny: The air pressure increases and the previous
state is partly cloudy.
Partly cloudy:
The air pressure reduces and the previous state is
sunny, or the air pressure increases and the previous
state is cloudy.
23