Technical Data - Leister DRIVE Instructions D'utilisation

Conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland confirms that this product, in
the version as brought into circulation through us, fulfils the requirements of the following EC directives.
Directives:
Harmonised standards:
Kaegiswil, 03.11.2017
Disposal
Electrical equipment, accessories and packaging should be recycled in an environmentally friendly way.
For EU countries only: Do not dispose of electrical equipment with household refuse!

Technical data

Type
Voltage
Power consumption
Frequency
Drive speed
Dimensions
Weight
Mark of conformity
Approval mark
Protection class I
Mains voltage cannot be switched over !
For hot air blower technical data, refer to the TRIAC AT or TRIAC ST operating instructions !
Technical data and specifications are subject to change without prior notice
12
2006/42
2014/30
2014/35
2011/65
EN ISO 12100, EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2,
EN 61000-3-3, EN 62233, EN 60335-1, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
V~
230
W 100
Hz
m/min.
mm 250 × 165 × 88, handle ø 63
kg
2.3 with 3 m power supply cord
Christoph Baumgartner, GM
DRIVE
120
100
50 /60
0.5 – 3 stepless
2
3
1