Epson WorkForce WF-3520 Serie Manuel De Base page 20

Basic Guide
E
Remove only the yellow tape.
c
Important:
❏ You must remove the yellow tape from the
cartridge before installing it; otherwise, print
quality may decline or you may not be able to
print.
❏ If you have installed an ink cartridge without
removing the yellow tape, take the cartridge
out of the product, remove the yellow tape, and
then reinstall it.
❏ Do not remove the transparent seal from the
bottom of the cartridge; otherwise, the
cartridge may become unusable.
❏ Do not remove or tear the label on the
cartridge; otherwise, ink will leak.
F
Insert the cartridge and press it until it clicks.
Replacing Ink Cartridges
G
Close the ink cartridge cover.
H
Close the scanner unit slowly. Ink charging
starts.
Note:
❏ The power light continues to flash while the product
is charging ink. Do not turn off the product during
ink charging. If the ink charging is incomplete, you
may not be able to print.
❏ If you had to replace an ink cartridge during
copying, to ensure copy quality after ink charging is
finished, cancel the job that is copying and start
again from placing the originals.
Ink cartridge replacement is complete. The product will
return to its previous status.
18