Timer Function; Lcd Backlight - AXIL NR1011 Manuel D'utilisateur

TIME/ALARM CLOCK SETTING (WHEN RADIO IS OFF.)
1. Press TIME/ADJ button once to enter time set mode, press twice to enter Alarm 1 set mode, press
three times to enter Alarm 2 set mode. Under each set mode, press Hour and Minute button to adjust
the time.
2. ALARM 1: SELECT "WAKE TO RADIO" OR "WAKE TO ALARM"
Press Alarm 1 button: 1) Once: to turn on the alarm clock function and enter "WAKE TO ALARM" mode.
2) Twice: to enter "WAKE TO RADIO". 3) Three times: to exit the Alarm 1 function.
3. ALARM 2: SELECT "WAKE TO RADIO" OR "WAKE TO ALARM"
Press Alarm 1 button: 1) Once: to turn on the alarm clock function and enter "WAKE TO ALARM" mode.
2) Twice: to enter "WAKE TO RADIO". 3) Three times: to exit the Alarm 1 function.
4. Press AL1/HOUR or AL2/MIN to stop the alarm when the alarm is on.
6. Only when the set time and clock time is in-phase to the setting point, can "WAKE TO ALARM" or
"WAKE TO RADIO" function be on.
6. SNOOZE FUNCTION
1) When the alarm is on, press SNOOZE button to enter SNOOZE mode, then it will wake you up again
after 8 minutes
2) When the radio is on, press SNOOZE button to enter SNOOZE mode, then it will be on again
automatically after 8 minutes.

TIMER FUNCTION

1. The time setting of counting down is from 90 to 10 minutes under the digression 90-80-70-60-50-40-
30-20-10-00. At 00 minute to exit the timer function.
2. When the count down time fi nishes, the unit will make beep sound for remind. Press TIMER button to
exit the timer function
WEEK SETTING
When the radio is off, press Band/Week button to set the weekday.

LCD BACKLIGHT

When the power is supplied by AC current, press Light ON/OFF button to turn on/turn off the backlight
and choose the backlight color; Seven colors for choosing, when you press the eighth times, the color will
show seven colors recycle automatically.
BATTERY BACKUP FOR TIME RUNNING
Insert 2pcs AA Size 1.5V batteries in the battery compartment in correct polarity. When AC power fails,
the batteries will supply the backup power to keep time running.