Uline H-6065 Mode D'emploi

H-6065
ROLLING TOOL
CHEST SEAT
TOOLS NEEDED
Phillips Screwdriver 14mm Wrench
Stool Body x 1
This product is designed to support a maximum
capacity of 350 lbs. (159 kg), including all tools and
equipment. It is intended to be used to support and
transport along a smooth and level surface. This product
is not intended, designed or engineered to be used for
any other purpose.
WARNING! Read, understand and follow all
instructions and warnings before using this
cabinet. Failure to do so may result in personal
injury and/or property damage.
WARNING! It is the owner and/or operators'
responsibility to study all warnings, operating,
and maintenance instructions contained on
the product label and instruction manual prior
to operation of this rolling tool cabinet. The
owner/operator shall retain product instructions
for future reference.
NOTE: Protect yourself and others by observing
all safety information.
PAGE 1 OF 6
1-800-295-5510
uline.com
Allen Wrench (included)
PARTS
Side Tray x 2
Casters x 4
SPECIFICATIONS
SAFETY
Support Bar x 2
Sleeve Nut x 4 Cap Nut x 8
Bolt Bolt
40mm x 4 35mm x 4
Capacity
Overall Dimensions
Maximum Drawer Capacity
Side Tray Maximum Capacity
The owner and/or operators are responsible for
unit maintenance and maintaining all decals
or warning labels. If the owner and/or operators
are not fluent in English, the product warnings
and instructions shall be read and discussed
in the operators' native language by the
purchaser/owner or his designee. Make sure
that the operator comprehends its contents.
Safety information shall be emphasized and
understood prior to usage. The cabinet shall be
inspected per the operating instructions.
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Tool Holder Shelf x 1
Washer x 8
Bolt
10mm x 2
350 lbs.
26⁄ x 14⁄ x 16"
22 lbs.
11 lbs.
0521 IH-6065