Using Your Lumin - 3B medical LUMIN Mode D'emploi

Using your Lumin

1. Plug the Lumin power cord in a wall outlet.
2. For your humidifier water chamber, open the water chamber and
lay both sides facing up. For your CPAP mask lay the mask with
the inside facing up and laying flat for maximum UV penetration.
3. If your mask or accessories are visibly soiled please first wipe
thoroughly with a damp cloth or a CPAP wipe.
4. Close the Lumin chamber drawer.
5. Press round power button, the Cycle-On orange light will turn on
indicating that the 5 minute disinfection cycle has started.
6. A light glow of UV Light will be visible through the tinted oval
window on the top of the unit while disinfection is occurring.
7. After 5 minutes the Lumin will emit a beep and the UV light will
no longer be visible. A green light will indicate completion of
the cleaning cycle. You may now remove your equipment. No
waiting period is necessary and your mask and equipment are
now ready to use.
8
Caring for your Lumin Device
The Lumin bulb is designed to exceed the life of your device
so changing the bulb should not be necessary. If, however, it does
become necessary, the bulb is removed by simply grabbing the
base and pulling firmly. The bulb is easily replaced by inserting the
new bulb and pushing it into the socket.
The Lumin drawer is lined with polished aluminum. Do not
use baking soda or other alkali-based cleaners on aluminum as it
can cause discoloration. Aluminum scratches fairly easily, so avoid
abrasive cleaners and scrubbers when cleaning and polishing. If
using a metal or glass cleaner, test the cleaner on a small portion of
the drawer. Polish with a soft lint free cloth.
Should the casing of your 3B Lumin become soiled you may
wipe down with any moist cloth. Do not immerse your Lumin into
water or any cleaning solvents. Place your Lumin on a level counter
or tabletop. Do not drop your Lumin or the bulb and or glass
drawer may shatter.
9
EN