Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Setting the alarm with natural sound
For waking up with one of the 7 natural sounds, press the 'alarm 1' button
seconds to activate the alarm. The 'alarm 1' icon will light up and the hours & minutes
digits will flash on the display
Adjusting the set alarm
Press the 'alarm 1' button
3
5
'-'
or '+'
buttons to set the hour. Confirm the set hour by pressing the 'alarm 1'
2
button
.
Press the 'alarm 1' button
flashing. Use the '-'
by pressing the 'alarm 1' button
Setting the desired natural sound:
Press the 'alarm 1' button
3
Use the '-'
or '+'
jungle 2 => valley 3 => wind 4 => water creek 5 => rain 6 => beep 7.
'A xx' will be shown on the display
natural sound). Confirm the set natural sound by pressing the 'alarm 1' button
When the alarm is enabled, the device will start 30 minutes before the set alarm by
gradually lighting up to a maximum brightness at the set alarm.
In other words, at the set alarm the light is at maximum brightness and the natural
sound will sound.
Note! If the set alarm is <30 min, the lighting up function is not enabled.
To switch OFF the alarm, press the 'alarm 1' button
natural sound will switch off.
Setting the alarm with FM radio
For waking up with FM radio, press the 'alarm 2' button
the alarm. The 'alarm 2' icon will light up and the hours & minutes digits will flash on
9
the display
indicating the set alarm time.
Adjusting the set alarm
Press the 'alarm 2' button
3
5
or '+'
buttons to set the hour. Confirm the set hour by pressing the 'alarm 2'
6
button
.
Press the 'alarm 2' button
flashing, and use '-'
by pressing the 'alarm 2' button
To set the desired FM preset
Press the 'alarm 2' button
9
indicating the set alarm time.
2
until the hours on the display
2
two times until the minutes on the display
3
5
or '+'
buttons to set the minutes. Confirm the set minutes
2
.
2
three times to set the desired natural sound.
5
buttons to select the desired natural sound: singing birds 1 =>
9
6
until the hours on the display
6
two times until the minutes on the display
3
5
or '+'
buttons to set the minutes. Confirm the set minutes
6
.
6
three times to set the desired FM preset.
(xx stands for the number of the selected
2
EN 07
9
start flashing. Use the
for ± 2 seconds, the light and
6
for ± 2 seconds to activate
9
start flashing. Use '-'
2
for ± 2
9
start
2
.
9
start
Publicité
Table des Matières
