Maintenance; Replacement Of The Battery - Orbis VIARIS UNI Manuel De L'utilisateur

MAINTENANCE

It is envisaged the maintenance of the VIARIS chargers should be very low,
limited to:
 Cleaning Tasks.
 Operation and voltage input voltage checks.
 Recommended annual service.
For cleaning and checking equipment connections charger MUST be
disconnected from power supply.
For the external cleaning of the equipment, it is recommended to use
a soft, dry cloth, e.g. a microfiber cloth. Do not use abrasive materials
or detergents.

REPLACEMENT OF THE BATTERY

The equipment carries a CR2032 battery of 3 V.
To replace the battery or for its extraction at the end of the product
life, remove the screws that fix the protection and the power
selection dial to access the circuit where it is housed.
Any handling involving the opening of the equipment should be carried
out by authorized and qualified installers.
ATTENTION: This product incorporates a battery. Do not
dispose of the product without taking the precaution of
disassembling the battery and depositing it in a suitable
container for recycling.
66