Installation; General Instructions; Radiophonic Listening Function - Hiltron security XR500 Manuel De L'usager

XR500 - User's Manual
2

Installation

2.1

General Instructions

Do not expose this product to bound temperatures or to bad weather.
!
The XR500 is protected from tampering, but we suggest you to place this product in a
!
protected place or in a volumetric detector zone, for further protection of the Central Unit.
Before you fix the product to the wall, make certain that the surface is smooth.
!
Fix the device by the four fischer included in the packing and no replacing them with others
!
of smaller diameter.
Fix the device at a height that allows an easy access to the frontal panel.
!
Connect other devices in accordance with
!
2.2

Radiophonic Listening function

Place the XR500 Central Unit in a proper position to obtain an efficient radio
transmission/reception activity and to have a perfect communication between the sensors.
The Radiophonic Listening function allows to "listen" all interferences and it convert them
in audio signals:
Open the Central Unit.
!
Connect the power supplier Al1 to 12v7Ah battery.
!
Press PROG (Program) button to enter in the Programming mode. The "ALLARME"
!
(Alarm) LED blinks quickly and the Central Unit utters a beep.
The "RETE" (Network) LED is lit to indicate the first step of Central Unit programming: RF
!
Channel Test. Press "ESCLUSIONE" (Exclusion) button to exclude the Zone 1 and to start
Radiophonic Listening function. (par.3.1.1)
Any radio frequency signalling in the environment is reproduced by the inside buzzer. If the
device doesn't utter acoustic signallings, there aren't noises in the environment; press the
buttons of XR20 Remote-control to verify the reception.
Press again "ESCLUSIONE" button of the Zone 1 to disable Radiophonic Listening
function, and to disconnect the battery before to fix the product at the wall.
CAUTION!
Extreme electromagnetic contaminations may affect the functionality of any
radio unit and of
traditional wired system.
30
security systems. In these cases, we suggest you to install a
CEI 79-3 Standard
security
.