Hanging The Fan; Blade Installation - LUCCI Airfusion Airlie II Eco Serie Guide D'installation

Airfusion Airlie II Installation Instructions
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is
positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in
operation. (Fig.4)
BLADE ATTACHMENT (Fig. 5)
1. Remove the two screws (1) from the covering plate (2) on the
top of the motor housing, and remove the plate.
2. Insert the blade (4) into the square slot of the motor.
3. Secure the blade on the bracket by using 3 motor screws (3),
ensuring they are tightened simultaneously.
4. Once completed, repeat the process on the remaining
blades.
5. Replace the covering plate on top of the motor housing.
LIGHT KIT INSTALLATION (Fig. 6)
NOTE: FOR FAN MODELS WITHOUT LIGHT, IGNORE THIS INSTALLATION PROCESS.
1. Install the bulbs (Max. 15W Energy saving bulbs, CFL spiral or LED bulb only, not included).
2. Lift and attach the glass to the lamp base and secure it by turning clockwise.
7 | P a g e

HANGING THE FAN

BLADE INSTALLATION

Fig. 6
Fig. 4
Fig. 5