Kalorik VC 42475 Manuel D'instructions page 12

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To clean the HEPA filter, press the button to open the front cover
and take out the HEPA filter. Wash under water with a soft brush if
necessary. Let the filter air dry and make sure it is completely dry
before reinserting into the unit.
The HEPA filter can easily be replaced with a new filter.
Notes:
Do not wash the filter or the dust container in the dishwasher or in
the washing machine. Do not use a hair dryer to dry the filter.
Always make sure the filter is in place before operating the
appliance.
NEVER IMMERSE THE MOTOR PART, THE ADAPTER, OR THE BASE, IN
WATER OR OTHER LIQUIDS.
To clean the base or the motor housing, unplug the charger from
the wall outlet, and clean with a slightly damp, nonabrasive cloth or
towel only. Dry the surfaces before plugging the adapter back into
the wall socket. Be careful not to switch the appliance on while
cleaning.
To clean the motorized brush:
If the motorized brush becomes blocked or jammed for any reason, the
brush may need to be cleaned.
First, switch off the device and carefully remove any items that may
have become entangled using a pair of scissors or a sharp knife.
If the brush needs to be taken out to be cleaned, push the slip
button at the bottom of the brush and carefully remove the brush.
www.KALORIK.com
12
VC 42475 - 180228

Publicité

Table des Matières
loading

Table des Matières