Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
To reduce the risk of fire, electric shock and injury:
•
Make sure that the power supply voltage corresponds to that indicated on the power supply value.
•
The adapter can be operated with AC 220-240V.
•
Do not use if the plug does not fit into the power outlet. Use an appropriate plug adapter for this case.
•
Do not pull the cable, do not bend, or place heavy objects on it.
•
Do not handle the plug with wet hands.
•
Do not use a damaged mains plug or a damaged socket.
•
Install this unit so that the power cord can be immediately removed from the socket, if a problem
occurs.
Inserting the battery fuse
•
The electrical parts
(Fuse, power supply, battery, charging unit)
•
Take out rear basket from package,place
the basket to rear rack,tighten two nuts
using an Allen key.
Pull upwards to open the footboard and battery
pack inside.
The small fuse box is located at the side next to
the battery.
Take one of the fuses which is supplied in the tool set,
open the cap of the fuse box, insert the fuse and
then close the cap again.
Stow all of the cables and the small fuse box away
at the side next to the battery.
Close the battery compartment and snap the lat-
ches shut. Check whether the latches have closed
correctly.
23
Publicité
Table des Matières
