Heitronic 37285 Mode D'emploi page 6


Make sure that the product has not been damaged during transport before taking it into operation. The
light may not be operated if there are any damages to electrical parts.

Keep packaging materials away from children and pets. Asphyxiation hazard!
5. Commissioning/Battery Change

Observing the safety and warning instructions, place the solar light in the required position. Take account
of the following detection radii before fixing the light into the required position using appropriate screws:

Now select the required operating mode by pressing the switch several times.

Choose a suitable place with direct sunlight to charge the light up for the first time. Make sure that the
sun is shining directly on the solar unit on the solar LED light. Shade on the solar unit impairs the
battery's charging function.

The solar LED light is charged using the solar panel on the top. It automatically switches on at dusk using
the day/night sensor. Make sure that the day/night sensor on the top of the light is not influenced by
another source. Otherwise it will not switch the light on at dusk.

Switch the light off before changing the battery.

Open the battery compartment cover on the back of the product and insert the battery.

Close the compartment cover after inserting the battery.

Press the switch to turn on.
2 of 4 | 28.06.2017