Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• Remove all packaging from the device.
• Clean the device with a damp cloth. Please refer to the 'cleaning and maintenance'
section.
• Continue with the procedure in the 'using the device' section.
Using the device
Place the device on a firm and solid surface, in an area with at least 50 cm of free space
around the device, generating a proper air circulation.
Do not operate the device close to walls, curtains or other objects that might block the air
inlets and air outlet, resulting in a bad air circulation.
Control panel
CONTROL PANEL:
Power ON/OFF & vaporizer button
1
Power LED indicator
2
Vaporizer LED indicator
3
FAN speed button
4
Modes
Connecting the power cable
Connect the power cable
9
of the device and connect the other end of the
cable to a USB power source.
The maximum power input = 5Vdc – 1A
Power ON/OFF
Press and hold the power ON/OFF button
When the device is powered on, it starts at low FAN speed, and the corresponding LEDs
&
light up.
2
5
To switch off the device, press and hold the power ON/OFF button
device.
FAN speed
There are 3 selectable FAN speeds; low, medium & high speed.
Repeatedly press the fan speed button on the device
been selected.
• Low FAN speed: LED indicator
• Medium FAN speed: LED indicator
• High speed: LED indicator
3
2
12
to the power input port
lights up
5
lights up
6
lights up
7
4
1
Low FAN speed LED indicator
5
Medium FAN speed LED indicator
6
High FAN speed LED indicator
7
for 2 seconds on the device.
1
until the required FAN speed has
4
EN 05
7
6
5
for 2 seconds on the
1
Publicité
Table des Matières
