Care And Cleaning; Commonly Asked Questions - Dunlap SoftHeat Mode D'emploi

3A 3B
DryHeatTherapy
1. Insert the pad into the cloth cover. (see Figure 1)
2. Plug the power cord into a 120 volt AC electrical outlet.
3. For Standard and Plus/Deluxe models, set controller to
desired setting. For Deluxe with Therapy Timer model,
press the flashing power button first, then set controller
to desired setting. (See figure 2)
 4. Place the pad on the area to be treated – See Figures
3A-D for examples of how to position heating pad.
 5. Turn pad off and unplug power cord when finished.
MoistHeatTherapy
1. Insert the pad into the cloth cover. (see Figure 1, do not insert Aquifer
2. Saturate the Aquifer sponge with warm water and wring out the excess.
®
3. Place the sponge on the heating pad inside the cloth cover.
4. Plug the power cord into a 120 volt AC electrical outlet.
5. For Standard and Plus/Deluxe models, set controller to desired setting. For Deluxe with
Therapy Timer model, press the flashing power button first, then set controller to desired
setting. (See figure 2)
6. Place the pad on the area to be treated with the Aquifer
See Figure 3A-D for examples of how to position heating pad.
7. Turn pad off and unplug power cord when finished.
StandardandPlus/DeluxeAutoShut-off
Check figure 2 to determine which controller you have. For the Standard and Plus/Deluxe
models, your heating pad is equipped with a special safety feature designed to shut the heating
pad off after 60 minutes of use. When the automatic shut-off feature turns the pad off, a light
on the controller flashes slowly to let you know the pad has shut off. To restart the pad, set the
controller to off and reselect the desired heat setting.
DeluxewithTherapyTimer
Check figure 2 to determine which controller you have. For Deluxe with Therapy Timer
model, your heating pad is equipped with a selectable auto shut-off. Your pad is designed to
automatically shut-off after 30 to 120 minutes - the time depends on which of the 4 auto shut-
off timer choices you select. When the auto shut-off feature turns off the pad, the power button
will flash. To restart the pad, simply press the power button and reselect the desired heat setting.
3C
3D
sponge yet)
®
sponge side against your body.
®

CARE ANd ClEANING

• Machine wash cloth cover in cool water, using a mild detergent.
• Hang dry or tumble dry on a cool setting.
• Wipe the pad clean with a damp cloth, do not use chemicals.
•  D ONOTIMMERSEORWETCONTROLLER.

COMMONly ASkEd QUESTIONS

Q:  I wasusingmyheatingpadandnowitisn'tproducingheatandthe
controllerisflashing.
A:  T his heating pad is equipped with an automatic shut-off safety feature to shut itself
off. Restart Standard and Plus/Deluxe controllers by setting the controller to off and
reselecting the desired heat setting. For Deluxe with Therapy Timer model, press the
flashing power button first, then set controller to desired setting to restart pad. Please
review figure 2 to determine which model you have.
Q:  H owfastshouldmyheatingpadheat-up?
A: Your heating pad is specially designed for the fastest heat-up allowed by the national
recognized independent test laboratory that the electronics industry relies on for
safety testing. Your heating pad should reach the high temperature setting in less than
10 minutes.
Q:  M yheatingpaddoesn'tfeelhotenough?
A: Your heating pad is specially designed for the highest heat allowed by the national
recognized independent test laboratory that the electronics industry relies on for
safety testing.
Q:  H owcomeIcan'tlieorsitonmyheatingpad
A: Lying or sitting on the pad could damage the wires in the pad. It's also very important to
avoid folding or creasing the pad. Additionally, the pad needs to have one side exposed to
the open air at all times so it can breathe for safe operation. Using the pad any other way
could cause damage to the pad or cause severe burns.
Q:  W hyisthelightonthecontrollerlitwhenI'mnotusingmyheatingpad
—I'dpreferitoff.
A: The Plus and Deluxe models are equipped with an extra safety feature to help alert you to
unplug your heating pad after use.