Haier HCR7918EIMP Manuel D'utilisation page 42

Masquer les pouces Voir aussi pour HCR7918EIMP:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 154
Troubleshooting
Problem
The automatic ice-
maker
does
not
produce ice or
produces a small
amount of ice.
Ice is not dispensed.
Water does not
come out.
Water is leaking
from dispenser.
Water tastes
strange.
40
Possible Cause
• Do not connect the water supply
pipe to the appliance and open the
supply valve.
• The water supply hose bent.
• Dispensed a large amount of ice
recently.
• Ice maker function not on.
Open the appliance door fre-
quently.
• The appliance door do not comple-
tely closed.
• Cubed or Crushed function is not
selected.
• The ice path blocked.
• The supply valve may be turned off.
• The water dispenser tank may be
empty.
• The water supply hose bent.
• Use unfiltered water.
• Water filter clogged or filter not in-
stalled.
• Water in reservoir is frozen be-
cause the controls are set too cold.
• Air may be present in the water line
system, causing water to drip after
being dispensed.
• The purified water or cold water not
been used for an extended period
of time.
• An expired filter is used.
Possible Solution
• Connect the water supply pipe
to the appliance and open the
supply valve completely.
• Straighten the water supply
pipe.
• It takes approximately 24 hours
to produce more ice in the au-
tomatic icemaker. Please wait.
• Turn "Ice on/off" on.
• If you open the appliance door
frequently, cold air will escape,
lowering the speed of ice pro-
duction. Do not open and close
the appliance door frequently.
• Close the appliance door com-
pletely.
• In the control panel, select
the modes for cubed ice and
crushed ice alternately to dis-
pense the ice.
• Check the ice and clean the ice
path regularly.
• Open the water supply valve.
• Fill the water dispenser tank.
• Straighten the water supply
pipe.
• Replace the water filter in ad-
vance.
• Replace the water filter .
• Set the refrigerator control to
a warmer setting and wait 24
hours. If the water does not
dispense after 24 hours, call for
service.
• Dispense water for at least 3
minutes to remove air from
system.
• Dispense water for at least 3
minutes .
• Replace the water filter .
GB

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hcr7918eimbHcr7918enmp

Table des Matières