Publicité

Les langues disponibles
  • FR

Les langues disponibles

Liens rapides

#23090
QUICK SETUP GUIDE
ENGLISH

Publicité

Table des Matières
loading

Sommaire des Matières pour Celestron NexStar 102SLT

  • Page 1 #23090 QUICK SETUP GUIDE ENGLISH...
  • Page 2 To set up the tripod, spread the legs outward until Unpack your telescope and verify that all parts are present. Your NexStar 102SLT MAK includes: a they are fully extended and push down center leg telescope tube, a tripod, a motorized fork arm mount, brace.
  • Page 3: Solar Warning

    Snap the battery cover back in place. For more information on this product or to download the instruction manual, please visit the respective product page on celestron.com SOLAR WARNING: Never attempt to view the sun through any telescope without a proper solar filter.
  • Page 4 Aligning the 25mm Eyepiece Finderscope Focus Knob The finder is one of the most important parts of your CHOOSE A TARGET CENTER THE TARGET IN THE EYEPIECE telescope. It helps you locate objects and center Take the telescope outside during the day and find Look through the telescope using your lower them in the eyepiece.
  • Page 5 You can view many other celestial objects, such as Celestron’s free SkyPortal app for iOS and Android planets, star clusters and nebulae using this same can help you locate and identify a wide array of technique if you know where to fi...
  • Page 6: Hand Control

    “NexStar SLT. ” point to these objects in the sky, you need to align the database to known positions (stars) overhead. Celestron’s SkyAlign procedure makes this process quick and easy. To align with SkyAlign, follow the steps below.
  • Page 7 Use the directional arrow keys on the hand control If the finderscope has been properly aligned, the The hand control will prompt you to center the bright to slew (move) the telescope towards any bright alignment star should now be visible in the field of alignment star in the center of the eyepiece.
  • Page 9 #23090 GUIDE DE DÉMARRAGE RAPIDE FRANÇAIS...
  • Page 10 ARTICLE #23090 Pour installer le trépied, écartez les pieds vers Déballez votre télescope, et vérifiez que toutes les pièces sont présentes. Votre NexStar 102SLT l’extérieur jusqu’à ce qu’ils soient complètement MAK comprend: un tube de télescope, un trépied, étendus et abaissez l’entretoise centrale.
  • Page 11: Avertissement Sur Le Soleil

    Retirez le cache de lentille de l’avant du télescope et Pour déplacer le télescope, utilisez les boutons Contactez le support technique de Celestron allumez la monture motorisée avec le bouton situé sur fléchés pour orienter ce dernier dans la direction celestron.com/pages/technical-support...
  • Page 12: Aligner Le Chercheur

    Oculaire Aligner le chercheur de 25 mm Molette demise au point Le chercheur est l'un des composants les importants CHOISIR UNE CIBLE CENTRER LA CIBLE DANS L'OCULAIRE de votre télescope. Il vous aide à localiser des objets Installez le télescope à l’extérieur en journée, et Regardez dans le télescope en utilisant votre oculaire et à...
  • Page 13 Vous pouvez voir un grand nombre d’objets célestes, L’appli SkyPortal gratuite de Celestron, disponible comme les planètes, les amas d’étoiles et les pour iOS et Android, peut vous aider à identifi er nébuleuses en utilisant la même technique, si vous...
  • Page 14 « NexStart SLT ». ciel, vous devez aligner la base de données sur des positions connues (des étoiles) au dessus de vous. La procédure SkyAlign de Celestron rend ce processus simple et rapide. Pour aligner avec Sky Align, suivez les étapes ci-dessous.
  • Page 15 Utilisez les flèches de direction sur le contrôle à main Si le chercheur a été correctement aligné, alors Le contrôle à main vous demandera de centrer l’étoile pour orienter (déplacer) le télescope vers un objet l’étoile d’alignement sera maintenant visible dans le d’alignement lumineuse au centre de l’oculaire.
  • Page 17 #23090 KURZANLEITUNG ZUR EINRICHTUNG DEUTSCH...
  • Page 18 Zum Aufbau des Stativs die Beine nach außen ziehen, Packen Sie Ihr Teleskop aus und überprüfen Sie ARTIKELNR. 23090 DEUTSCH die Vollständigkeit aller Teile. Ihr NexStar 102SLT bis sie vollständig ausgezogen sind. Drücken Sie die MAK enthält: einen Teleskoptubus, ein Stativ, mittlere Beinstrebe nach unten.
  • Page 19 Richtungspfeiltasten, um das Zielfernrohr in die Wenden Sie sich an die technische Unterstützung von an der Basis der motorgesteuerten Gabel ein. gewünschte Richtung zu schwenken. Verwenden Celestron unter celestron.com/pages/technical-support Sie zum Navigieren im Menüsystem die mit UP 08-19 (AUFWÄRTS) und DOWN (ABWÄRTS) (Nr. 6 und Nr.
  • Page 20 Ausrichten des 25-mm-Okular Sucherfernrohrs Fokussierknopf Das Sucherfernrohr ist eines der wichtigsten Teile WÄHLEN SIE EIN ZIEL ZENTRIEREN SIE DAS ZIEL IM OKULAR Ihres Teleskops. Es hilft Ihnen, Objekte zu suchen Nehmen Sie das Teleskop tagsüber mit nach draußen Schauen Sie mit Ihrem Okular bei niedrigerer und im Okular zu zentrieren.
  • Page 21 Sie das Okular wechseln. Mit dem gleichen Verfahren können Sie viele weitere Mit der kostenlosen SkyPortal-App von Celestron Himmelsobjekte wie Planeten, Sternhaufen und für iOS und Android können Sie eine Vielzahl an Nebel beobachten, wenn Sie wissen, wo sich diese Himmelsobjekten schnell und einfach suchen und am Nachthimmel befi...
  • Page 22 SLT“ an. müssen Sie die Datenbank an bekannten Positionen (Sternen) über Ihnen ausrichten. Das SkyAlign- Verfahren von Celestron macht diesen Vorgang schnell und einfach. Führen Sie folgende Schritte durch, um eine Ausrichtung mit SkyAlign vorzunehmen. Verwenden Sie die Bildlauftasten UP (NACH OBEN) Normalerweise zeigt Ihre Handsteuerung die zuletzt Drücken Sie ENTER (EINGABE), um Städte-...
  • Page 23 Verwenden Sie die Richtungspfeiltasten auf der Wenn das Sucherfernrohr richtig ausgerichtet wurde, Die Handsteuerung fordert Sie auf, den hellen Handsteuerung, um das Teleskop in Richtung eines sollten Sie jetzt den Ausrichtungsstern im Sichtfeld Ausrichtungsstern in der Mitte des Okulars zu des Okulars sehen.
  • Page 25 #23090 GUIDA RAPIDA ALLA CONFIGURAZIONE ITALIANO...
  • Page 26: Guida Rapida

    ITALIANO Per configurare il treppiede, allargare le gambe verso Disimballare il telescopio e verificare che siano presenti tutti i componenti. Il NexStar 102SLT MAK l’esterno fino a quando non saranno completamente comprende: un tubo del telescopio, un treppiede, estese e spingere verso il basso il supporto centrale una montatura motorizzata con braccio a forcella, un delle gambe.
  • Page 27: Avvertenza Solare

    Sistemare nuovamente il coperchio in posizione. Per maggiori informazioni sul prodotto o per scaricare il manuale d'istruzioni, visitare la pagina relativa al prodotto su celestron.com AVVERTENZA SOLARE: Non tentare mai di osservare il sole attraverso un telescopio senza un filtro solare adeguato.
  • Page 28: Allineamento Del Cercatore

    Allineamento del Oculare da 25 mm cercatore Manopola della messa a fuoco CENTRARE L'OGGETTO NELL'OCULARE Il cercatore è uno dei componenti più importanti del SCEGLIERE UN OGGETTO DA OSSERVARE Guardare attraverso il telescopio utilizzando l’oculare telescopio. Aiuta a localizzare gli oggetti e a centrarli Portare il telescopio all’esterno durante il giorno e con minore ingrandimento.
  • Page 29 È possibile osservare altri corpi celesti, come pianeti, L’app gratuita SkyPortal Celestron per iOs e Android ammassi solari e nebulose, utilizzando questa tecnica può aiutare a localizzare e identifi care un’ampia se si conosce la loro posizione nel cielo notturno.
  • Page 30: Utilizzo Del Telecomando

    è necessario dicitura “NexStar SLT”. allineare il database con posizioni note (di stelle) nella propria posizione. La procedura SkyAlign Celestron rende tale processo semplice e veloce. Per allineare tramite SkyAlign, seguire i passaggi indicati di seguito.
  • Page 31 Utilizzare i tasti direzionali sul telecomando per ruotare Se il cercatore è stato correttamente allineato, la Il telecomando richiede di centrare la stella di stella di allineamento dovrebbe ora essere visibile (muovere) il telescopio verso un oggetto celeste allineamento al centro dell'oculare. Una volta centrato, luminoso nel cielo.
  • Page 33 #23090 GUÍA DE INSTALACIÓN RÁPIDA ESPAÑOL...
  • Page 34 Para instalar el trípode, separe las patas hacia fuera Desembale el telescopio y compruebe que estén presentes todas las piezas. Su NexStar 102SLT MAK hasta que estén totalmente extendidas y presione incluye: un tubo de telescopio, un trípode, un soporte hacia abajo el soporte de las patas central.
  • Page 35: Necesita Ayuda

    Saque la tapa de la lente de la parte anterior del Para mover el telescopio use las flechas de dirección Contacte con el soporte técnico de Celestron telescopio y active el interruptor de encendido de la para mover el telescopio en la dirección deseada.
  • Page 36: Alinear El Localizador

    Alinear el Ocular de 25 mm localizador Mando de enfoque CENTRAR EL OBJETO EN EL OCULAR El localizador es una de las piezas más importantes ELEGIR UN OBJETO Mire por el telescopio usando el ocular con menor de su telescopio. Le ayuda a localizar objetos y Saque el telescopio de día y localice un objeto potencia.
  • Page 37 Puede observar muchos más objetos celestes, como La app gratuita de Celestron SkyPortal para iOS y planetas, clústeres estelares y nebulosas usando Android puede ayudarle a localizar e identifi car una esta misma técnica si sabe dónde encontrarlos en el...
  • Page 38 “NexStar SLT”. alinear la base de datos con posiciones (estrellas) conocidas visibles. El procedimiento SkyAlign de Celestron hace que este proceso sea rápido y sencillo. Para alinear con SkyAlign, siga los pasos siguientes: Use los botones de desplazamiento UP (ARRIBA) Normalmente su mando manual mostrará...
  • Page 39 Use los botones de flecha del mando manual para Si el localizador se ha alineado correctamente la El mando manual le solicitará que centre la estrella desplazar (mover) el telescopio a cualquier objeto estrella de alineación debería estar visible en el de alineación brillante en el ocular.

Ce manuel est également adapté pour:

23090

Table des Matières