Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Timer Display
A
Mode Display
C
Power Switch
E
1. Check that neither the appliance nor the power cable has been damaged in
any way during transportation when first using the heater.
Turn on the power switch and press the ON/OFF
Press MODE
Press ON/OFF
will stop working . When the heater is turned on , press MODE
to select appropriate setting . which is shown in the LED as follow :
automatically set the temperature to default mode (30 °C), If the temperature is not
set within 2 minutes after turning on the heater.
Control Panel Functions
button to select the heat setting.
button again , the LED will be turned off and the heater
Temperature Display
B
Function Button
D
button to turn on the heater.
4
button
The heater will
Publicité
Table des Matières
