Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
PREPARING THE CAMERA FOR USE WITH THE ACTIONPACK
It is necessary to remove the USB door on the HERO6 & HERO5 so the camera can connect to the ActionPack.
The USB door is designed to be safely removed and reinstalled on the camera as needed.
1. Open the USB door on the right side of the camera.
2. With the door open at a 90 degree angle to the camera body gently pull downward at a 45 degree angle
to remove the door.
3. Keep the door in a safe place,
you will need this when not
using the ActionPack on
the camera.
2
ENG
Publicité
Table des Matières
