jbc LD 3100 Mode D'emploi page 2

We appreciate the confidence you have shown in JBC by purchasing this station.
It has been manufactured with the highest standards of quality to ensure reliable
service. Before starting up the apparatus, we suggest you to read through the
following instructions carefully.
FEATURES
Stations composition
MD 3050 120V Ref. 3050100:
- Control Unit
- 5W soldering iron
with tip R-0 D
- Soldering iron stand MS 1300
- Instructions manual
LD 3100 120V Ref. 3100100:
- Control Unit
- 20W soldering iron
with tip B-05 D
- Soldering iron stand LS 1100
- Instructions manual
ID 3110 120V Ref. 3110100:
- Control Unit
- 50W soldering iron
with tip R-10 D
- Soldering iron stand US 1000
- Instructions manual
TD 3120 120V Ref. 3120100:
-
-
Ref. 3430100
-
-
Ref. 3030000
SD 3140
Ref. 0290130
-
Ref. 0415460
-
-
Ref. 3130100
-
Ref. 3000000
The 20, 50, 60 and 70W soldering irons may be
Ref. 0290110
connected to Control Unit Ref. 3130100 though
Ref. 0415460
it is recommended to use the 70W soldering
iron with Control Unit Ref. 3730100, which is
specially suited to the power needs of that
Ref. 3130100
soldering iron. This latter control unit can also
Ref. 3010000 be used with all the soldering irons except the
Ref. 0290100 5W one, which needs its own Control Unit Ref.
Ref. 0415460 3430100.
1
Control Unit
60W soldering iron with solder
feed system and tip C-20 D
Soldering iron stand TS 1200
Instructions manual
120V Ref. 3140100:
Control Unit
70W soldering iron
with tip T-55 D
Soldering iron stand US 1000 Ref. 0290100
Instructions manual
ENGLISH
Ref. 3130100
Ref. 3020000
Ref. 0290120
Ref. 0415460
Ref. 3730100
Ref. 3070000
Ref. 0415460