english
product presentation
product description
standBy Button
to switch on or off
the light(s)
light indicator
colour Button
mode Button
group Button
precautions
Carefully read and save these instructions before using the product.
use the remote control in accordance with the instructions given in this user manual. failure to do so will
invalidate your guarantee.
• Do not immerse in water.
• Do not subject to prolonged exposure to the sun.
• Do not expose to fire.
• Keep out of reach of children.
• When not in use for an extended period of time, remove the battery from the remote control.
• When replacing the battery, use the battery reference provided at the end of this user manual.
• Do not attempt to dismantle.
> For any questions relating to the proper functioning of this product, please contact your point of sale.
operating modes
two remote control operating modes are possible depending on whether a group of lights has been
created (Group mode), or otherwise (free mode), using the remote control:
1- Group Mode:
Paired
(within its radio control area).
light
2- free Mode:
the remote controls all the 'free' lights within its direct radio
=
range (a light is said to be 'free' if it has not been paired (grouped) using
grouped
light
a remote control).
BeneFits oF grouping lights
Control by area
:
Each group is controlled by a remote control.
extenSion of the area :
Each light transmits the orders to the next light thereby
extending the remote control's range.
SynChroniSation
:
Perfect synchronisation of the lights, particularly in color mode.
8
Battery
door
changing
the Battery
Insert a coin in the
notch and turn to
oPEn
open and close.
the remote control only controls the lights in its group
controlling the light
switching on and oFF the light
the indicator light flashes.
=
Standby
button
Color
Mode
button
button
selecting a colour
the indicator light flashes.
=
Color
button to pass through all available colors.
button
Press briefly the button again to resume the
selecting a colour mode (amBience)
the indicator light flashes.
=
Mode
cold
button
rotation of cold
colors
sound + mode
Sound effect on any selected mode
**
sound + color
Sound effect on any selected color
*
sTep
rotation of colors
*
SOUND + COLOUR
the indicator lights up white.
=
briefly press this button (in this mode)
sweeT
to select a new color.
rotation of pale
colors
color
buTTon
Briefly press this button to switch off or on
the light (and restore previous light mode).
=
You can briefly press one of
these two buttons as well to switch
on the light (the same way as for
standby button).
Briefly press this button
change the color.
nine-color
Press and hold (approx. 3 seconds) this
Press it briefly then to set the color.
color scrolling, etc ...
Briefly press this button to change the
color mode (ambience).
color indicaTes mode selecTed
The lead colour flashes once before the mode starts.
warm
rotation of hot colors
rainbow
Scrolls through all the colors
cycle oF
8 modes
candle
candle effect - lEds flicker
**
SOUND + MODE
the indicator lights up blue.
=
briefly press this button (in this mode)
to select a new mode.
color
buTTon
cycle
9