Safety Stickers; Identification Of Machine; General Description - Honda UMK425E1 Manuel Du Propriétaire

SAFETY STICKERS

Your brushcutter must be used with care.
For this reason, adhesive labels in the form of pictograms have
been placed on the machine to remind you of the main operating
precautions. Their meanings are specified below. These labels are
considered to be an integral part of the machine. If any of them
comes off or becomes difficult to read, please contact your dealer to
replace it. We also recommend that you should carefully read all the
safety instructions (see page
Rotating speed
n/min.
General instructions
[1]
[2]
Authorized cutting attachments
[4]
[1] WARNING: Read the owner's manual before using the machine.
[2] WARNING: Projection hazard. Ensure that all people and animals stay
at a minimum distance of 15 m when you operate the machine.
[3] Always wear goggles, a hard hat and any other necessary protective
accessories to protect your eyes and body from objects (such as
gravel, glass or pieces of metal) thrown up by the cutting attachment.
[4] The brushcutter is to be used with a nylon or a metal disc line cutting
attachment only. Do not use a circular saw blade with the standard
protector.
[5] Cutting attachment rotation speed.
[6] The engine emits toxic carbon monoxide. Do not run in an enclosed
area.
[7] Petrol is highly flammable. Stop the engine before refueling

IDENTIFICATION OF MACHINE

[A] Identification plate
Rue des Châtaigniers - Pôle 45
L
WA
45140 Ormes - France
dB
-----
[8] [9]
[8] Sound power level garanted according to the directives 2000/14/EC,
2005/88/EC
[9] Conformity mark, according to the directives 98/37/EC, 2000/14/EC,
2004/108/EC, 2005/88/EC, 2006/42/EC
[10] Model - Type
[11] Model - Name
[12] Year of manufacture
[13] Serial number
[14] Conformity mark Russian
[15] Name and address of manufacturer
2).
[5]
[3]
[1] [6]
[10] [11]

GENERAL DESCRIPTION

[17]
[18]
[A]
[16]
[25]
[24]
[21]
[17]
[A]
[18]
[7]
[16]
IDENTIFICATION OF COMPONENTS
[16] Engine
[17] Spark plug
[18] Recoil starter
[19] Air filter
[20] Fuel tank
[21] Throttle cable
[22] Clutch housing
[23] Control grip
[24] Throttle control trigger
[25] Start / Stop switch
[15]
[14]
[13]
[12]
CONTENTS OF BAG
[35] Attachment protector
[36] Screw and spacer
[37] Goggles
[38] 3-tooth blade and its protection
[39] Stabilizer, spacer and nut
[40] Multipurpose wrench
[41] Hexagonal wrench
[25]
[32]
[23]
[30]
[24]
[21]
[22]
[19]
[20]
[30]
[26]
[33]
[23]
[22]
[19]
[20]
[26] Transmission shaf
[27] Transmission head
[28] Nylon line cutting head
[29] 3-tooth blade
[30] Harness attachment point
[31] Double harness
[32] Bike handle
[33] Loop handle
[34] Line cutter blade
[40]
[41]
[39]
[27]
[29]
[26]
[31]
[27]
[28]
[34]
[37]
[36]
[38]
[35]
3 EN